Safety Cable. (Recommended installation on fixture at factory) Used on hanging units where extra safety measures are required.
One-Unit Hanger & C-Clamp Supports one Two-Light Cyc-Strip from C-Clamps in center of hanger, thus allowing Cyc-Strips to pivot about a vertical axis on cyclorama curve.
Direct Mounting Color Frame Holder (2-UNIT) Mounts on 2,4,6,8,10 and 12-Light Cyc- Strips (in multiples of two). Required when Molequick Filter Frame and/ or Shadow-less Safety Guard is used.
C-Clamp & Hanger
Two req. Attach to ends of any length Cyc Strip when hanging fixtures at top of cyclorama or on overhead pipes.
Direct Mounting Color Frame Holder (3-UNIT) Mounts on 3,6,9 and 12-Light Cyc-Strips (in multiples of three).Required when Molequick Filter Frame and/ or Shadowless Safety Guard is used.
Molequick Filter Frame
Mounts in Type 27220, Type 27320 or Type 33920 Direct Mounting Color Frame Holders. One required for each globe to be filtered.
One-unit Hanger & C-Clamp
Supports One-Light Cyc-Strip from C-Clamps in center of hanger, providing a means of pivoting unit on a vertical axis.
Direct Mounting Color Frame
Holder (1-UNIT) Mounts on front of 1-Light Cyc-Strip. Required when Molequick Filter Frame and/ or Shadow-less Safety Guard is used.
Typical Floor Mounted
Typical Hanging Cyc-Strip
Multi-Circuit Cyc-Strip on stage floor with Direct Mounting Color Frame Holder.
Multi-Circuit Cyc-Strip mounted in 26530 Floor Mounting Brackets on stage with Direct Mounting Color Frame Holder.
Multi-Circuit Cyc-Strip suspended by 26120 C-Clamp & Hanger (two) attache to overhead pipe of 1.9" O. D.