Telescoping Hanger

specifications

Hanger:

Construction:

Type 500424-XX

Seamless steel tubing, brass ductile iron casting

Size:

1' 10" to 8' 10" (See table for adjustments and lengths)

Adjustments:

8" to 16' 8" (See table for adjustments and lengths)

Attachments:

Standard collar assembly has ½-13 threaded hole for attaching accessory hanger adapters or strap yoke fixtures requiring ½-13 bolt.  Optional collar assembly with ⅜-16 threaded hole furnished upon request.

Mounting:

Clamps on the following:

2 inch pipe (2.375" O.D.)

1 ½ inch pipe (1.900" O.D.)

1 ¼ inch pipe (1.660" O.D.)

1 inch pipe (1.315" O.D.)

Finish:

Maroon powder coat enamel

Accessories

Item Number

Heavy Duty C-Clamp and Adapter

(Replaces flat end 1 ⅛" dia. yoke pin)

500353

Collar Assembly, ½-13 tapped hole

(Standard with hanger)

Collar Assembly, ⅜-16 tapped hole

(Furnished in place of 500404 upon request)

Hanger Adapter

(One ⅜" dia. spud to one ½-13 threaded end)

Double Hanger

(Two ⅝" dia. spuds to ½-13 threaded end)

Triple Hanger

(Three ⅝" dia. spuds to ½-13 threaded end)

Hanger Adapter

(One 1 ⅛" Junior receiver to ½-13 threaded end)

Hanger Adapter

(Replaces flat end yoke to ½-13 threaded end)

500404

500413

500406

500411

500412

500415

500418

Hanger Adapter

(Replaces radius end yoke pin to ½-13 threaded end)

Swivel feature allows fixture to be rotated about a vertical axis of hanger and to be locked at any desired position.

500422

Stirrup Hanger Adapter with 500488 ½-13 hardware

(Used to suspend any Type 1201 C-Clamp or Hanger Adapter witch attaches to the Type 1201 C-Clamp.)

500429

Hardware,  ½-13 bolt with washer

(For use with 500404 Collar Assembly)

Hardware,  ⅜-16 bolt with washer

(For use with 500413 Collar Assembly)

Used to attach fixture with strap yokes directly to hanger.

500488

500489